...
This manual represents the knowledge at the above-mentioned time. TKH security works non-stop to improve her products. For the most recent technical information please contact your consultant or dealer.
...
Introduction 1
...
This document describes outlines the Elevator service in iProtect. It explains within iProtect, detailing its purpose and how it should be
configuredconfiguration. Currently, this integration is available for compatible with the DOAS Mitsubishi Lift system.
1.1 Short
...
Explanation
The TKH security iProtect integration with elevators control systems adds higher enhances the security and destination control to the of elevators in your building. The integration means that you can restrict This system allows for restricted access to elevators and specific floors for cardholders via , governed by time schedules and access rights.
For example: instance, a user can may be assigned granted access only to only the ground floor and the 12th floor from 07:30 till to 19:00 hour.
The operation is such that straightforward: cardholders swipe their card cards on the elevator reader that is present located in the so called elevator call unit. The elevator call unit in turn then displays only shows the available floors accessible to the user, or the user can only enter the floor numbers , to which the user is also entitled. (they are entitled, depending on the type of call unit) . In this integration, the iProtect software sends a command commands directly from the server to the elevator controller over via the IP network. This replaces the conventional , replacing the traditional relay method of using relays for the connection.
The purpose of the elevator link is to send transmit a command to the elevator controller when the following conditions are met:
a: access is granted (based on the normal standard access rights)
b: the person individual has rights the right to travel with use the elevator
c: the reader has a call location and a known recognized ID for the elevator controller
If all these conditions are truesatisfied, a message is send sent to the elevator controller.
...