...
Connect the LPR camera to the Orion (see chapter “Connecting the reader”)
Press the discover button in the line dialog of the Pluto.
Wait until the discover process is ready: Read-in event=> Read-in event: Stop, Line: xxx…
Refresh the line dialog of the Pluto, if an OSDP device is detected it will be shown as a Node below the Prt2 port of the Orion.
Change the OSDP compatibility setting at the OSDP node to “ASCII Raw data”
Right mouse click at the OSDP node in the treeview and click on “add reader”
Fill in the logic unique name of the reader.
Click on the save button.
...
| Info |
|---|
Most used setting for buzzer time = 2 |
6. Card
...
encoding
To enable license plate recognition, a card configuration must be created within iProtect. To do this, go to Access > Settings > Card Configuration and use the wizard provided in this section.
...