...
| Note |
|---|
The KpBus connector can only be used when the PRT2 port is not being used. |
...
...
6. iProtect Implementation
...
6.1 General
OSDP readers are completely handled by the nodemanager, so the nodemanager should run to obtain access by a OSDP card reader.
The reader manager is not involved by handling the OSDP protocol.
...
6.2 Card encoding
To enable license plate recognition, follow these clear steps to create a card configuration within iProtect:
Navigate to Card Configuration:
Go to Access > Settings > Card Configuration.
Initiate the wizard by right-clicking on the tree view.
Start the Wizard:
Click on the button labeled “Wizard card number presentation.”
Configure Presentation:
A new pop-up will appear.
Enter a logical name for the new presentation, such as “LPR presentation.”
Choose between:
“Number plate no country code”
“Number plate with country”
Select the option based on the customer's preference.
...
6.3 Configure the Reader in iProtect
To configure an OSDP reader, please follow the steps outlined below:
...
| Info |
|---|
The “read card before loop activation” setting can be beneficial when the camera captures the license plate before the vehicle triggers the loop. |
...
7. License Plate Configuration in iProtect
A license plate operates much like a standard card within the iProtect system. To enable this feature, you need to connect the LPR (License Plate Recognition) reader to a reader group, which is then linked to an access profile.
...