...
Release notes | 10.45  |
Table of contents
| Table of Contents | ||||
|---|---|---|---|---|
|
...
Version | O.S./ Firmware | Maintenance / serverbox | Internet connection required |
iProtect 10.5 | Ubuntu 24.04 LTS | >= 10.0203.04xxx | Yes, for installation and updates |
...
TKH security works non-stop to improve its products and their safety.
From iProtect version 10.5, the software version from which you update and the software version to which you update must be taken into account.
Why is this change? The security policy prevents newly installed software from working or communicating with software that does not meet these security requirements, so that a roll-back will no longer work.
2.4.1 Which iProtect version supports which Pluto RootFS
...
iProtect | Linux | rootFS |
|---|---|---|
10.1 or lower | Ubuntu 16.04 | V5-68a |
10.2 - 10.4 | Ubuntu 20.04 | ≥ V6-12 .11.14 - V7-xx |
10.5 or higher | Ubuntu 24.04 | ≥ V6.11.14 - V7-xx |
| Info |
|---|
Although RootFS v5-68a is still supported by iProtect 10.2 and 10.3, this will no longer be the case when iProtect 10.4 or higher is used. |
...
| Info |
|---|
Before updating to iProtect version 10.5, controllers should be running RootFS v6.11.12 14 or higher. |
2.5 Software and firmware
...
Hardware / Device | Software / Firmware (minimum) |
Pluto (RootFS) | 76.12.x03 |
Reader manager | 6.x |
Orion | 1.5.34 |
iX-serie Reader firmware | 3.x |
RIO firmware | 1.2.50 / 2.16.0 |
TANLock | 1.0.0 |
...
Sirius 1 support in combination with Reader manager version 6
SimonsVoss SI2
Traka 32 support
3.1
...
Making use of the hta-tool can entail security risks. That was the reason we wanted to deprecate this.
Since many customers are still using this tool, an option has been added to continue using this hta tool. This usage is disabled by default.
The following option has been added to the dialog:
Installation | Settings | System parameters, tab: Other, “HTA enable”.
...
Pre-announcement
3.
...
1.1 Network controller
Polyx Network controller: End of life: 31-12-2025
Apollo 1: End of life: 31-12-2025
iPU-8: End of life per: 31-12-2025
3.
...
1.2 Support of INVR / License plate recognition on Polyx and IPU-8
iProtect 10.4 will be the last version which supports an iNVR Node on a iPU-8 or Polyx controller. If this situation occurs, the advise is to move the INVR node to a local server line.
4. iProtect server and application
This chapter describes the additions and/or changes of the application.
General improvements are:
...
64bit database.
...
Log functionality by all services (for analyzing purposes).
...
Sense maintenance: Reduce the amount of getdivalist calls.
...
New date time format support carddata interpretation (DDxMMxYYYY where x could be any seperator).
...
3.2 Revised advance notice
Making use of the hta-tool can entail security risks. That was the reason we wanted to deprecate this.
Since many customers are still using this tool, an option has been added to continue using this hta tool. This usage is disabled by default.
The following option has been added to the dialog:
Installation | Settings | System parameters, tab: Other, “HTA enable”.
4. iProtect server and application
IPROTECT Access version 10.5 is similar as a base to version 10.4.
Any changes from 10.4 are explained later in this chapter.