How To Article | HTA-20230623-AVW-01 iProtect Access / Security | How To Articles | How to update iProtect™ to 10.3  |
| Table of Contents |
|---|
How to update the iProtect™ Application.
Download the latest files on our download section of the knowledgebase:
...
Creating a new Backup of the iProtect system and download the Backup from the maintenance page.
Setting up Ubuntu server for iProtect
Use the manual that TKH security will provide to set up the new Ubuntu server and to setup the iProtect-Setup.
If you use the same hardware server, it is recommended to use a new harddrive if the drive is more then 5 years old. Also make sure the memory is sufficient of iProtect https://tkhsecurity.atlassian.net/wiki/spaces/KB/pages/9496592546/iProtect+-+Release+notes+10.3#2.2-Hardware-specification
Updating the iProtect version.
...
Cockpitpanel is reachable by the url https://{ipadress}/cockpitpanel
Install the new serverbox at the maintenance page.
Go to the iProtect™ maintenance page (Click on the gear button on the login screen)Install > Upload iProtect (1the iProtect maintenance tab in cockpitpanel)
Activate the maintenance functions by clicking on the activating button at the top left.
Go to file upload section at the maintenance page (Install > Upgrade > Configuration)
Click on the “...” button below Upload iProtect™ (1) and select the new maintenance page version and click on the “Post” button.
Refresh your browser webpage.
...
Install the new iProtect™ version at the maintenance page.
Install > Upload iProtect (1)
Click on the “...” button and select the new iProtect™ version at the maintenance page and click on the “Post” button.
...