...
Table of contents
| Table of Contents | ||||
|---|---|---|---|---|
|
...
Guide lines for 2500 card users and 250 readers and 5 concurrent users*.
Version | CPU | Ram | Disk |
10.3 | >= 2.0 Ghz dual core | 16 GB | >= 500GB |
Test system (small) | 1.6 Ghz dual core | 4 GB | 100GB |
| Info |
|---|
For large systems (>1000 readers, >20 concurrent users), a minimum of 32GB internal memory and 8 cores is recommended. * |
...
The minimum required operating system version for iProtect:
Version | O.S./ Firmware | Maintenance / serverbox | Internet connection required |
iProtect 10.3 | Ubuntu 20.04 LTS | >= 10.02.18 | Yes, for installation and updates |
For iProtect 10.03 and Ubuntu 20.04, there is a TKH repository with all needed files for installing and maintaining the setup files.
...
2.4.1 Which iProtect version supports which Pluto rootFS
iProtect version | Pluto rootFS version | Comment |
|---|---|---|
10.1 | <= 5.68a | |
10.2 | <= 5.68a & 6.x | |
10.3 | <= 5.68a & 6.x | 5.68 is supported but version 6 is automatically downloaded and after reboot version 6 becomes active |
10.4 | = > 6.x | 5.68 is not supported. Controllers needs to be update to version = > 6 before starting the update procedure. |
2.5 Software and firmware
Software versions of the connected hardware are managed from iProtect by default.
Below you will find an overview of the most used hardware and the minimum version that are installed (provisioned) when updating iProtect.
Hardware / Device | Software / Firmware | Note |
Pluto (rootFS) | 6.11.14 | |
Reader manager | 5.03.57 | |
Orion | 1.5.22 | Keep using firmware 1.5.18 when a Sallis node is connected to the Orion! |
iX-serie Reader firmware | 2.8.2 | |
RIO firmware | 1.2.25 / 2.4.2 |
| Info |
|---|
Release notes of the software/firmware are available on request. |
...
When a major version number changes, it should be taken into account in advance that a new license is necessary. Please contact TKH Security service department or your account manager for this.
From version | To version | New license needed |
|---|---|---|
10.01.x | 10.3.x | Yes |
10.02.x | 10.3.x | Yes |
10.3.x | 10.3.x | No |
2.7 Browser support
All tests are done with default browser settings, if some functionalities require changes to the settings, this will be mentioned in the specific manual. The following browsers are supported in iProtect:
Browser | Version |
|---|---|
Google Chrome | >= 112 |
Mozilla Firefox | >= 102.9 ESR release |
Mozilla Firefox | >=111 |
Microsoft Edge | >=111 |
| Info |
|---|
Microsoft internet explorer (IE) is not supported anymore. |
...
End of support HTA functionality. HTA is nowadays seen as a security risk, this function will be removed in iProtect 10.4the future.
4. iProtect server and application
...