...
Hardware | Description | Extra information | Versions | ||
iProtect | SMS | - | From: 9.03.02 Recommended from: 10.01.xx | ||
Pluto | Reader manager | - | From 5.00.41 Recommended from: 5.03.23
| ||
Hardware control applet | only needed when using iProtect version 9.10.xx and lower | From: 3.00 | |||
Orion | Door controller | Bootloader | From: 2.3.0.15 Recommended from: 2.4.2.17 | ||
Firmware | From: 1.4.40 Recommended from: 1.5.18.86 | ||||
Sirius | I Serie | - | From firmware: 1.5.32 | ||
Sirius | IX serie |
| From firmware: 2.0.5.a.1 | ||
SimonsVoss | SmartIntego VCN SI2
| Use with iProtect version 09.03.02 until iProtect 10.03. | 2.1.6411.25403 | ||
Use with Smartintego VCN version: 2.1.6411.25403 | Access DB Engine Runtime 2007 | ||||
SmartIntego VCN AX
| Use with iProtect version 10.01.xx and higher | From 3.0.7600.18050 | |||
SimonsVoss lock firmware | SV SI2 Cylinder | 5.4.16 | |||
SV SI2 handle | 5.6.09 | ||||
SV AX handle and Cylinder | 1.1.519 | ||||
Card | Mifare DESFire | - | ev1 EV1,EV2 and ev2EV3 |
| Note |
|---|
SV SI2 is compatible only up to iProtect version 10.03. Before upgrading to iProtect 10.04, you must transition to the AX protocol. Please refer to the relevant chapter for further details. https://tkhsecurity.atlassian.net/wiki/spaces/KB/pages/9507766290/iProtect+-+SimonsVoss+VCN#7.2-Update-Smartintego-VCN-version%2C-2.6-to-3.0 |
...
DESFire default interpretation (for regular readers)
Enrolment interpretation (for enrolment readers)
Update interpretation (for update readers, and VCN locks)
| Note |
|---|
From From iProtect 10.04, the Update card data interpretation must be used instead of the Enrollment interpretation at the Enrollment readers. |
3.1 Configuring the card presentation
Click in iProtect™ Aurora on the menu item Access | settings | card coding | card number presentation
...
Lock: firmware in the lock, presented as X.X.XX
Reader: firmware in the reader, presented as X.XX.XX
6.1.4 4 Unlock time
Default door open time used when a valid card is presented.
...