...
Installation Manual | IM-20210309-TP-45 Access Control | Controllers | Apollo(N) Network Controllers |Polyx™ Controllers | |
|
| Table of Contents |
|---|
This manual represents the knowledge at the above-mentioned time. TKH security works non-stop to improve her products. For the most recent technical information please contact your consultant or dealer.
...
2.2.1 Polyx™ D+ control
...
2.2.2 Polyx™ ND+ control
...
3 Mounting
Mount the rail against the wall (mounting rail 35 mm, see NEN-EN 50022).
Push Polyx™ against the rail and click it in.
...
Connect the readers, I/O’s, ethernet connections and possibly the power supply, power supply for the door lock, Orbits etc.
4.1 Ports
...
Separate power supply 24VDC; 2) Emergency power supply 12VDC (battery);
Ethernet connection including power supply (PoE+: tot 30W);
Serial RS 232 port (diagnostics/monitor);
2 serial RS422 ports for readers, reader-Orbits, I/O-Orbits;
RS232 (external connection);
12 inputs/outputs;
power supply for the door lock 12VDC (not available if power supply=PoE)
4.2 Separate power supply 24VDC
...
Enter ‘kflipo’ and press Enter. All flash banks will be deleted.
Will now erase 0xFB8000 bytes starting from 0x40000
……….
Flash Erase complete. 0xFC0000 bytes erased
done...Enter ‘dlnipo’ and press Enter. The software will now be loaded now from the laptop or
PC with the “Tftpd32” program.
Trying to download FS fs.s19
Downloading S-Record 'fs.s19' from 192.168.0.244
S-record download successful!
TFTP transfer completed
Read 1897316 bytes (3706 blocks)
Trying to download SquashFS squashfs.img
downloading to address: 0x40EA11B9
Downloading Image 'squashfs.img' from 192.168.0.244
TFTP Error #1: File not found
Errors in TFTP download.
......
Flash Erase complete. 0xC0000 bytes erased
kernel Programming complete
board will autostart from flashThe error message TFTP Error #1 is no problem, in the script an extra file will be looked for, but this is of no importance.
Enter ‘gfl’ and press on Enter or restart manually the Polyx.
Enter the IP-address (see chapter 5.2).
Load the Polyx firmware (see chapter 6.1).
Load the nodemanager software / security key (see chapter 6.2).
...
9 Technical data
