...

How To Article | HTA-20230525-PL iProtect ASM | iProtect How To Articles |

...

1. Enter the name of the label e.g., UPS Webpage

2. Press on the button “New”

...

KPSENSOR Port (Temperature /Humidity)

1. Click on the KP sensor port

2. Enable this input

3. Enter the number of sensors (max 10)

4. If you want an alarm message in the alarm handler, enable this function

5. If you want a message by mail, enable this function. (Setup van mail server is required)

6. Click on save settings

...

Lock control port

1. Click on the lock control port

2. Enable the lock output which is related to the card reader (If you do not have a card reader, create a “Dummy” reader.

3. If you need some inputs, enable this function (e.g., door position, push button)

...

Reader port

1. Click on the reader port

2. Enable this port

3. If you have a motion detection, activate the Guarded area

...

A1 port

1. Click on port A1

2. Enable this port

3. Select e.g. the PIR sensor

4. For this sensor, you need to enable Guarded area

5. Click on the save settings button

...

A2 port

1. Click on port A2

2. Enable this port

3. Select e.g. the Smoke detector sensor

4. For this sensor, you can enable the alarm handler and the email notification option.

...

A3 port

1. Click on port A3

2. Enable this port

3. Select e.g. the Shock sensor

4. For this sensor, you can enable the alarm handler and the email notification option.

...

D1 port

1. Click on port D1

2. Enable this port

3. Select e.g. the Water sensor

4. For this sensor, you can enable the alarm handler and the email notification option.

5. Click on the save settings button

Image RemovedImage Added

Threshold

1. Click on the icon “Threshold”

2. Click on the button “New”

3. Enter the limit values

4. Click on the save settings button

...