...
Technical Manual | TM-20221022-TV-01 iProtect Access / Security | Integrations | Intrusion Detection |  |
Installation manuall iProtect → UNii  |
...
Right-click on the virtual line that just is made and select Add node.
Enter the following data:
Name: Enter a logic name
Type: ‘General intrusion’
Driver name: ‘Alphavision API driver’
Communication: UDP (These setting must correspond with the Transmission setting in the UNii, see chapter 2.2)
Manager code: the manager code of the panel.
Encryption key: Enter the encryption key which is entered or used in chapter 2.2
Active: (check)
Port: Enter the local port number (6502) of the intrusion panel, see chapter 2.2.
IP-address: enter the IP-address of the intrusion panelSave the data.
After a successful connection press on the field Read-in for taking over the programmed configuration from the Alpha-ML UNii panel (groups and points). When the read-in starts or stops, an event will be generated.
...