...
SA power option P 115 Power option for SA PTZ camera stations, 115 Vac
SA power option P 230 Power option for SA PTZ camera stations, 230 Vac
Washer pump For detailed information, refer to the SA-WP10, SA-WP25 datasheet
Camera housing | |
---|---|
Ingress protection rating | IP66/ IP67 |
Body material | Electro-polished 316L stainless steel |
Rotation | +170° to -170° (±5°) No continuous rotation |
Tilt angle | +90° to -90° (±5°) |
Variable speed | up to 40°/sec pan and 20°/sec tilt (peak) |
Max Torque | 80 Nm pan, 107 Nm tilt Backlash <0.1° |
Preset accuracy | 0.04° |
Sunshield | Standard |
Internal demister/heater | Standard |
Wiper | Standard |
Washer system | Optional |
Operating temperature | -20 °C to +60 °C |
“Dry heat” test | +75 °C, 2 days |
Weight | 38 kg |
Electrical | |
Supply voltage | 24 V 50/60 Hz; Optional 115 V 50/60 Hz; 230 V 50/60 Hz |
Power consumption | 80 W max |
Electrical connections | Internal terminal block |
Network | |
Interface(s) | 2x 10/100 Mb Ethernet (4-wires 0.5 mm2 from conduit). Each camera its own interface and IP-address |
Protocols | IPv4, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, UPnP, IGMP, SNMP, QoS, ONVIF |
Password levels | User and Administrator |
Supported browsers | Internet Explorer (6.0+), Chrome, Firefox, Safari |
User accounts | 20 |
BC820v2H3 Full-HD IP camera | |
Camera | |
Image sensor | 1/2.8” Progressive scan CMOS |
Effective pixels | 2048 (H) x 1536 (V) |
Shutter speed | 1 - 1/10000 s |
Minimum scene illumination | 0.04 lux (colour), 0.002 lux (b/w), F/1.6 |
Dynamic range (WDR) | 120 dB (in WDR-2: dual exposure mode) |
Lens | 30x Optical zoom, F/1.6 (W), F5 (T); 10x digital zoom |
Lens focal length | 4.3 mm (W) - 129 mm (T) |
Horizontal field of view | 67.4° (W) - 2.6° (T) |
Features | Back light compensation, auto/manual white balance, (3D/2D) noise, IR light compensation |
Exposure | Auto (iris or shutter priority) / Manual |
Day/Night (IR-cut filter) | Auto/night/day/smart (with adjustable threshold levels) |
Video | |
Compression algorithm(s) | H.264 (baseline / main / high profile); MJPEG |
Supported resolutions | 2048x1536; 1920x1080 (1080p); 1280x1024; 1280x720 (720p); 1024x768; 800x600; 720x576 (D1); 640x480; 352x288 (CIF) |
Quad streaming | Stream 1 | Stream 2 | Stream 3 | Stream 4 |
H.264 instances in 50/60 fps | Stream 1 : 1920x1080 | Stream 2 : --- | Stream 3 : --- | Stream 4 : --- |
(best resolution setting at 50/60 fps | Stream 1 : 1920x1080 | Stream 2 : 720x576 | Stream 3 : --- | Stream 4 : --- |
higher resolution at lower frame rate possible) | Stream 1 : 1920x1080 | Stream 2 : 640x480 (30fps)| Stream 3 : 342x288 (30fps)| Stream 4 : --- |
H.264 instances in 25/30 fps | Stream 1 : 2048x1536 | Stream 2 : --- | Stream 3 : --- | Stream 4 : --- |
(best resolution setting at 25/30 fps | Stream 1 : 1920x1080 | Stream 2 : 1920x1080 | Stream 3 : --- | Stream 4 : --- |
higher resolution at lower frame rate possible) | Stream 1 : 2048x1536 | Stream 2 : 1280x1024 | Stream 3 : --- | Stream 4 : --- |
Stream 1 : 2048x1536 | Stream 2 : 1280x1024 | Stream 3 : 352x288 | Stream 4 : --- | |
Stream 1 : 2048x1536 | Stream 2 : 1280x720 | Stream 3 : 720x576 | Stream 4 : 352x288 | |
Stream 1 : 1920x1080 | Stream 2 : 1280x1024 | Stream 3 : 1280x720 | Stream 4 : 352x288 | |
H.264 instances in 25/30 fps in WDR-2 | Stream 1 : 1920x1080 | Stream 2 : --- | Stream 3 : --- | Stream 4 : --- |
(best resolution setting at 25/30 fps | Stream 1 : 1920x1080 | Stream 2 : 1920x1080 | Stream 3 : --- | Stream 4 : --- |
higher resolution at lower frame rate possible) | Stream 1 : 2048x1536 | Stream 2 : 352x240 | Stream 3 : --- | Stream 4 : --- |
Stream 1 : 1920x1080 | Stream 2 : 1280x720 | Stream 3 : 720x480 | Stream 4 : --- | |
MJPEG | One of the above resolution formats in each instance can be MJPEG instead of H.264 if the resolution is lower than or equal to 1920x1080 |
Compression bit rate control | Constant bit rate (CBR), variable bit rate (VBR) |
Output bit rate (per H.264 stream) | Up to 20480 kb/s |
Number of video output streams | Up to 20 (RTSP) |
Total output data rate (max) | 50000 kb/s |
Video frame rate | 1 to 60 fps / 1 to 50 fps |
TC620 Thermal imager | |
Thermal imager | |
Imager | Uncooled micro-bolometer |
Pixel pitch | 17 µm |
Resolution | 336 x 256 pixels |
Focal length | 7.5 mm | 9 mm | 13 mm | 19 mm | 25 mm | 35 mm | 50 mm |
Field of view | 45°x35° | 35°x27° | 25°x19° | 17°x13° | 13°x10° | 9.3°x7.1° | 6.5°x5° |
f-number | f/1.4 | f/1.25 | f/1.25 | f/1.25 | f/1.1 | f/1.5 | f/1.2 |
Spectral bandwidth | 7.5 µm to 13.5 µm (LWIR) |
Frame rate | 8.3 fps (xx-S version) Optional: 30 fps (xx-F version) |
Sensitivity (NEdT) | < 50 mK @ f/1.0 |
Time to image | Instantaneous |
Digital zoom | No |
Video | |
Number of video streams | 2x H.264/MJPEG |
Max resolution | 720 x 512 @ 25/30fps (up-sampled) |
Number of output streams | Up to 20 (RTSP) |
Compression algorithm(s) | H.264 (H.264/MPEG-4 AVC), MJPEG |
Encoder bit rate control | Constant bit rate (CBR), variable bit rate (VBR) |
Output bit rate (per H.264 stream) | Up to 6 Mbit/s |
Total output data rate | Up to 32 Mbit/s |
Video overlay | 3x Text, 1x bitmap (BMP, GIF); PID Object data (blue blob), event data (red box); |
Analytics (Thermal camera only) | |
Freeform zones or detection lines | 2x in stand-alone (Web configured) up to 8x with the “VCA Configuration Server” |
Event type | Detection line: Touch, Cross (directional sensitive), Cross Detection zone: Touch, Enter, Inside, Exit |
Event time | 0 to 10 s |
Event output | generic ONVIF, digital I/O, SPI |
Measuring range | -40 °C to 550°C |
Accuracy | +/- 20 °C (T< 100 °C) or +/- 20% (T> 100 °C) |
Order information | |
SA-BC820v2H3-TC620 7.5-S PTZ 24 | Ex 316L PTZ IP Ti 7.5mm 9Hz 336 24Vac |
SA-BC820v2H3-TC620 7.5-S PTZ 24 | Lens type in mm: 7.5, 9.0, 13, 19, 25, 35, or 50 |
SA-BC820v2H3-TC620 7.5-S PTZ 24 | ‘-S’ for Slow (8.3 fps) or ‘-F’ for fast (30 fps) |
SA-BC820v2H3-TC620 7.5-S PTZ 24 | Replace 24 with 115 or 230 respectively for 115 or 230 Vac power |
Accessories | |
SA wall mounting bracket PTZ | 316L wall mounting bracket for SA PTZ camera housings |
SA-WP10-10m-VSF-24 v2 | 10 litre washer tank, pump 10 m delivery head, 316L frame, 24 Vac |
Maintenance & replacement kits | |
EX/SA-MK Wiper | Maintenance kit for the wiper: Rubber blade and support |
EX/SA-Wiper | Replacement for Stainless steel wiper (complete assembly) |
SA-MK PTZ | Maintenance kit SA PTZ camera: O-Ring, screws, desiccant bags |
SA-MK PTZ | controller Telemetry controller for (SA) PTZ camera station, RS485, PELCO D protocol |