Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

The GeoMap functionality enables operators to show the actual GPS location of a camera. It uses an online map tool to display the position of the camera. The camera connection status (online or offline) is shown using the camera icon color; it is green by default and red if camera is disconnected. Each camera position can be configured individually by defining the GPS coordinates.

The GeoMap uses a new GeoMap panel which can be configured in any layout. The GeoMap requires an internet connection on either the setup or operator SenseClient. There is no offline mode. Sense Server does not require an internet connection.

...

Setup

Configuraring the GPS coordinates is done in the Devices->GeoMap tab. By selecting the camera in the camera selection list it will show the current position of the camera. It will only show the position of the selected camera. See below.

...

  • Latitude
    Latitude part of the GPS coordinate. Can be modified manually

  • Longitude
    Longitude part of the GPS coordinate. Can be modified manually

  • Clear
    Clear the GPS coordinates

  • Center
    Center the camera icon in the middle of the current map view

  • Icon Type
    Choose either a camera or a dome icon

  • Orientation
    Icon orientation in degrees (0-360)

Layout

The panel type associated to the GeoMap is called ‘GeoMap’ and available in the list of panel types in the layout manager. In the example below a Target panel is used to the live feed from a camera when doing a double-click action in the GeoMap.

...