*Devices – Commend

Configuration Article | CA-20200930-TP-07

VDG Sense | Setup | Devices | Commend

Add Commend server
There are two ways to add a Commend server to the configuration. The easiest way is to let Sense search for Commend servers in the local network. Press the ’Find’ button in the lower left corner of the screen to open the ’Find’ dialog (assuming the ’Device’ tab is open and the intercom serverlist is visible). Select the commend servers in the list which need to be added.

The alternative way is to add the servers manually. Press the ’+’ button in the bottom-left corner of the screen to add one server. The fields displayed in the image below should be filled in with the correct information. When done press the ’Apply’ button which is located in the bottom-right corner of the screen.

Assign camera to station
After adding the server to the configuration it will automatically fill the stationlist with all the available stations on the Commend System. The callnumber and stationnames are defined in the Commend configuration and cannot be edited by Sense. The last column is used to assign cameras to the stations (one to many). The camera selected will be used for audio playback. After adding a Commend Server to the configuration or changing a setting it can take up to 10 seconds before the stationlist is displayed.

See screencapture below for an example stationlist.