*FaceR Setup
- Tom Polman
Configuration Article | CA-20200930-TP-12 VDG Sense | Setup | Profiles | FaceR  |  |
What is FaceR?
FaceR is an optional feature which is only available with a valid FaceR license. This feature will give Sense the ability to recognize faces and act accordingly. FaceR can isolate faces from video images and digitize them into metadata. Metadata points are placed on eyebrows, eyes, nose and mouth. The found faceprint can be compared with the person lists (black- or white list). With a match or mismatch, an event can be created.
Settings for the FaceR algorithm are made in the Profiles menu. These settings are only available if Sense has a valid license for FaceR.
Note: FaceR functionality is not available in VDG Sense 2.5 or higher
FaceR Setup
To enable FaceR on a device, open the profile tab and select the subtab “FaceR”.
Activate FaceR
Activates or deactivates FaceR. When active, every face found will start recording.
Note that FaceR cannot be activated on devices that have FaceD activated.
FaceR Confidence
Sets the minimal value for confidence of the found face.
FaceR Recognise
Sets the minimal value for recognize of the face for matching.
FaceR Enroll
Sets the minimal value for recognize of the face for enrolling.
FaceR Min Eye Distance
Sets the minimal distance between the eyes in pixels.
FaceR Max Eye Distance
Sets the minimal distance between the eyes in pixels.
FaceR Match Distance
Sets the interval in milliseconds between two matches.
FaceR Face Found Distance
Sets the interval in milliseconds between two face found events.