*Requirements and initial steps

Open

Configuration Article | CA-20201001-LG-06 iProtect Access / Security | Video | Aurora Setup LPR |

Open

For effective license plate recognition, the following is necessary:

1. Make sure that a license plate recognition license is in place for every iProtect™ Aurora camera (ID: 1100).

2. Make sure that infrared lighting has been installed.

3. Make sure that the camera used for license plate recognition has a resolution of at least 1.3 Megapixels.

4. A daylight filter should be used.

5. Mount the camera used for license plate recognition within a distance of 11 metres from the license plate. The angle between the license plate surface and the camera must not exceed 40°.

6. In iProtect™ Aurora, configure the camera picture in such a way that a regular vehicle in the entrance fills the entire width of the picture.