*Default PTZ at the reader or input

Owned by Tom Polman
Last updated: Sept 15, 2022
2 min read

Configuration Article | CA-20201001-LG-09

iProtect Access / Security | Video | Configuration Aurora |

Since 9.00 we can determine the PTZ directly at the reader or input, without having to create a procedure for each preset. Requirement:
– Preferably a Dummy Camera with a preset below it as described .
– That we have 1 manual procedure with the action “pantilt go to preset position”, like the following action:

Then we can select the “camera preset” in the reader or input dialogue directly at the camera.