exportVideo
Configuration Article | CA-20240119-MF-20 VDG Sense | API | Functions | Media | Â |
Note:
This function requires an API license
Introduced in VDG Sense version 2.7.3
The exportVideo command can be used to create video exports in native format on the VDG Sense server. These exports can be stored on the server itself or on a user specified drive location such as a mapped network drive. They can not be downloaded directly via the API.
The exportVideo requires the POST method, with additional parameters in XML format as described below.
Using this command, it is possible to create an export of multiple cameras in one API request, each camera with independed start and end times as described in the <devices> node of the XML body.
Special care must be taken when including xml specific characters. These are ‘&’, ‘<' en '>‘. The ampersand (‘&’) character can not be sent by this command because it will be part of the URL. See next paragraph.
As the value of this event is in the query part of an URL, the ampersand character (‘&’) cannot be part of it. It must be URL Encoded. See i.e. http://www.w3schools.com/TAGS/ref_urlencode.asp. The best practive is to URL Encode the complete value.
Request
Â
The exportVideo API function can be used in two ways:
to create a video export
to remove a pending videoexport
Â
Creating a video export
POST exportVideo
<!--?xml version="1.0" ?-->
<export>
<devices>
<device>
<serverid>[UID]</serverid>
<deviceid>[UID]</deviceid>
<starttime>[timestamp]</starttime>
<endtime>[timestamp]</endtime>
</device>
<device>
...
</device>
</devices>
<path>[path]</path>
<bandwidth>[bandwidth]</bandwidth>
</export> |
The parameters in the XML body should be of the following format:
parameters | type | remarks |
---|---|---|
serverid | [UID] | Unique server id |
deviceid | [UID] | Unique device id |
starttime | [timestamp] | UTC Timestamp (format:Â yyyy-mm-dd hh:nn:ss.zzz) |
endtime | [timestamp] | UTCÂ timestamp (format:Â yyyy-mm-dd hh:nn:ss.zzz) |
path | [string] | Path (on the server) to where the video is exported to, if the folder doesn’t exist it will be created |
bandwidth | [value] | [optional] If the storage path is connected via a metered connection, then it’s possible to add a maximum bandwidth value here in bytes per second. If a value of 0 is used, it will try to copy with maximal available bandwith |
Deleting a pending videoexport:
Post a request using the DELETE method, where exportid is the id of the export to be deleted.
127.0.0.1/command?command=exportVideo&exportid=[exportid]
Response
The server will return an exportId if the export is in progress. If it fails it will return an error message.
The exportid’s will only be valid during the currently open API session. After that, it will be reset to 1. Also after a SensePluginManager reset it will be reset.
Â
Result:
<!--?xml version="1.0" ?-->
<result errorcode="0">
<export>
<exportid>[exportid]</exportid>
</export>
</result>
In case of error:
error code | description | remarks |
---|---|---|
0 | Ok | Ok, no error |
-2 | No device | Â No device found for the supplied cameraid/deviceid. |
-4 | Invalid Timestamp. | Invalid datetime format. See Timestamp. |
-17 | No server | There is no server with the supplied id. |
-33 | No serverID | No serverID parameter given. |
-34 | No deviceID | No deviceID parameter given. |
-37 | Enddate before startdate | Enddate parameter is before the startdate parameter. |
-48 | No videodata for timestamp | No videodata for the given timestamp |
-57 | No exportid | in case of a DELETE, exportid needs to be added to the request |
-58 | Incorrect path | path does not exist |
-60 | Not enough disk space | there is not enough space to store the video in supplied path |
-61 | Unable to create directory | The directory could not be created on the server |
Related
Changelog
2.7.3 - Introduced