How To Article | HTA-20220531-LG-09

iProtect Access / Security | How To Articles |

How to control the elevator with 1 card reader and multiple outputs.

This only works when the reader and outputs are programmed at same line!

We will use the option at the output called: Follow card group.

Programming the needed card groups:

Go to menu: Access > Settings > Card group

Right-click in the left window and select “Add card group”

Create the needed Card groups (only fill in the name):

Programming outputs

At the reader i/o you don't have to program the outputs, we have to do that manually.

Go to menu: Installation > Hardware > Line

Open the Line (Pluto) and Orion. Right click on the Orion where the outputs are and select “Add output”

At Source you’ll fill in Card Group and the reader, also select the Card group name.

Go to menu: General > Person

Open the card and assign the card group to the card

Be sure the card has also normal access rights to this reader.

You can check in the last events if the programming is correct.