...
| Expand |
|---|
| title | How to update or remove offline devices... |
|---|
|
5.1.1 Access rights managementIf you want to add or remove access rights to an offline lock, you can do this using the steps below. Browse to the menu: Installation | Hardware | Reader. Find the desired reader and unfold the reader with the + sign. Click on the reader group list, here you can add or remove the desired reader groups. after After +- one minute the offline synchronization status of the lock will change to "the configuration is not in sync" Get the configuration with the dom service app by syncing the app with the DOM controller. Sync the offline device with the DOM service app. Sync the DOM controller with the DOM service app. after After +- one minute the offline synchronization status of the lock will change to "the configuration is synchronized".
5.1.2 Remove a deviceBrowse to the menu: Installation | Hardware | Node Double click on the DOM controller node. Right-click on the reader to be deleted. Press on the button Delete. Open the Device unbound section below the DOM controller node. Select the device and change the state from “coupled” to “not coupled”. Sync the DOM service app with the DOM controller. Sync the offline device with the DOM service app. Sync the DOM controller with the DOM service app. Remove the device from iProtect by using the delete button.
| Info |
|---|
When a device has been successfully removed and properly uncoupled, the device is in freewheel mode. |
| Warning |
|---|
Be aware! When removing a device without proper disconnection, the device may enter a state that it can only be disconnected using the master card. In the worst case, the lock must be returned to the supplier. |
|
...
| Expand |
|---|
| title | How to update or remove online devices... |
|---|
|
5.2.1 Access rights managementIf you want to add or remove access rights to an offline lock, you can do this using the steps below. Browse to the menu: Installation | Hardware | Reader. Find the desired reader and unfold the reader with the + sign. Click on the reader group list, here you can add or remove the desired reader groups. The device and the RF-NetManager start communication and synchronize the changes automaticalyautomatically.
5.2.2 Remove a deviceBrowse to the menu: Installation | Hardware | Node Double click on the DOM controller node. Right-click on the reader to be deleted. Press on the button Delete. Open the Device unbound section below the DOM controller node. Select the device and change the state from “coupled” to “not coupled”. The device and the RF-NetManager will start communication and the device will be uncoupled automaticalyautomatically.
|
6. Migrating from A1/B1 to DOM API-implementation
To take advantage of the new API-implementation and hereby the benefits (see Chapter 1.2), the setting OSS configuration in IPROTECT must be changed.
...