...
How To Article | HTA-2022053120230206-LG-0401 iProtect Access / Security | How To Articles |  |
|
| Table of Contents |
|---|
How to update the iProtect™ Application.
Ask our service and support desk for the latest ServicePack and iProtect™ version, it is also important that the OS (iPuntu) is up to date as wellDownload the latest files on our download section of the knowledgebase:
Prechecks
Before the update it is required that the state of the system is known. Not functioning readers, nodes and lines must be noted.
Compatibility and discontinued hardware/software is noted in the release notes:
https://tkhsecurity.atlassian.net/l/cp/Co1YADGz
Minimal requirements:
Firmware inbraak (Unii 2.4.0 / ML 5.0.5 / XL 3.11)
Rootfs Pluto's (5.68a)
Firmware polyx (UBIFS)
Diva/Sense (2.5)
Update
Download the Backup from the maintenance page.
Upload the new iProtect™ version at the maintenance page
...
You must delete browser history before logging in to iProtect.
Installing the new license if iProtect version was < 10.1:
https://tkhsecurity.atlassian.net/l/cp/51UgXjhX
If a new license is needed, please contact our orderdesk.
Activating lines
To be sure all lines and nodes gets the latest software, select the system default Provisioner group.
...
Activate the line’s now, the Door controllers will get the new software and start with the installation automatically. The doors will be non-functional for 5-10 minutes. Open doors beforehand if they are critical.
Finishing the update
When all lines are updated and the re-index message is gone, you can finish the update with the button in the menu:
Installation > Database restore > Activate line
Some points to check:
Readers
Database couplings
Client login (remove browser cache)
Import / Export
iNVR
Printing badges/cards
Intercom
browser certificate