...
Technical Article | TA-20220401-TV-01 Security Management | FlinQ Foresight | |
|
Table of Contents |
---|
FlinQ Foresight Studio
Overview
This is an overview of the FlinQ Studio to configure FlinQ Foresight.
...
Server
Maintain
Physical Devices
Logical Devices
Window
Help
Server
...
The server menu gives you four options.
Log In Ctrl+L
Log Out Ctrl+Shift+L
Connect
Disconnect
Log in
When you click on Log In Ctrl+L , Ther will be a new dialog box on the screen.
...
The dialog box gives you the options to enter the Username and password.
The user needs to have permissions to use FlinQ studio to login.
When the User is logged in, this will be shown at the bottom status bar of FlinQ studio.
...
Log Out
When you use the button Log Out Ctrl+Shift+L, the session wil log off.
Connect
The option Connect is to Connect FlinQ studio to the server.
A new dialog box will pop up and you have the ability to enter the IP Address and Port of the FlinQ Server.
...
Disconnect
When you use the Disconnect button, the FlinQ studio will disconnect from FlinQ.
Maintain:
...
The maintain menu gives you 2 options:
...
Both of the options open a new dialog box.
Locations
This menu is to create locations in FlinQ, If locations are made, you can link logical devices to a location. This is to order the locations in the Gui, for the workflows and reporting.
...
The language options are set at building level, they can be:
Dutch
German
English
French
Spanisch
Danish
Users
This menu is used to add users to the FlinQ studio and Status application.
This users do not have rights in the Foresight GUI.
...
button is to copy the selected user
Physical Devices
...
In this menu you can add, remove and change the Physical devices.
The configuration separates different types of Physical devices:
...
Logical Device(s) are linked automatically when you select this physical device in the logical device form.
Command option, have a selection for 2 choices.
ExternalIdForClosingBarrier, is used when you have separate outputs for opening and closing a barier.
DtmfCode is the code that needs to be send to activate the relais.
...
FakeSetting is not used anymore, this has to stay empty.
Logical Devices
...
In this menu you can add, remove and change the logical devices.
The configuration separates different types of logical devices:
...
Location: Here you can select the location where the device must shown in the GUI.
...
Window
...
Full Screen
The Full Screen F11 function sets the FlinQ Studio Application to full screen.
Always on top
The Always on top function sets the FlinQ studio Application always on top of the screen so if you open an other program, FlinQ studio will be shown on top.
When this function is enabled, you will see a check mark at the option.
...
Help
...
When you select the About FlinQ Studio, it will pop up the version of FlinQ.
...