Technical Support Guide | MB-20240527 iProtect Access / Network controller | Firewall settings  |
Firewall settings
When using other network ports, they will need to be opened. For this purpose, a number of .taz files have been created that can be uploaded through a provisioner element or directly to the network controller.
DESCRIPTION | TCP/UDP | PORT(S) | OPEN PORT(S) | CLOSE PORT(S) |
|---|---|---|---|---|
Alphatronics | TCP/UDP | 6501, 6502 |
|
|
ATS intrusion panel | UDP | 3001 |
|
|
ATS intrusion panel | UDP | 3001, 3002 and 32000 |
|
|
iNVR | TCP | 443 and 19000 |
|
|
TANLock | TCP | 443 |
|
|
Sallis | TCP | 1234 |
| |
SimonsVoss WO Gateway node | TCP | 2101 |
|
|
Default firewall settings
| TCP | 22, 161*, 162*, 443, 20200 and 20600 * SNMP enabled for ApolloN |
|
|
Enable firewall |
|
|
|
|
Disable firewall |
|
|
|
|
After a reboot of the Pluto, the firewall is automatically turned on again. | ||||
If the Network controller (line) is set to Secure (Port setting), the SSH and Apache service deactivated. If necessary you can enable this by changing the Port setting to Maintenance mode.