Technical Support Guide | MB-20240527 iProtect Access / Network controller | Firewall settings  |
Firewall
When using other network ports, they will need to be opened. For this purpose, a number of .taz files have been created that can be uploaded through a provisioner element or directly to the network controller.
If the Network controller (line) is set to Secure (Port setting), the SSH and Apache service deactivated. If necessary you can enable this by changing the Port setting to Maintenance mode.
Files and ports
DESCRIPTION | TCP/UDP | PORT(S) | OPEN PORT(S) | CLOSE PORT(S) |
|---|---|---|---|---|
Alphatronics | TCP/UDP | 6501, 6502 |
|
|
ATS intrusion panel | UDP | 3001 |
|
|
ATS intrusion panel | UDP | 3001, 3002 and 32000 |
|
|
iNVR | TCP | 443 and 19000 |
|
|
TANLock | TCP | 443 |
|
|
Sallis | TCP | 1234 |
| |
SimonsVoss WO Gateway node | TCP | 2101 |
|
|
Default firewall settings
| TCP | 22, 161*, 162*, 443, 20200 and 20600 * SNMP enabled for ApolloN |
|
|
Enable firewall |
|
|
|
|
Disable firewall After a reboot of the Pluto, the firewall is automatically turned on again. |
|
|
|
|