Apply to: All Siqura codecs
Encoder with firmware version 1.xx - 3.xx cannot be updated with the .sqrfw file via the web page.
At the time, there were special upgrade tools for this, which are no longer supported in the current Windows version.
In this article an explanation to be able to update old encoders
Condition: TFTP Client
Make sure that the Windows Feature, TFTP Client, is checked.
This setting can be found in the Windows Control Panel.
How to:
Open and extract UpgradeBat.zip in a new folder.
Copy the firmware xxx.nkffw in the same folder
open "Command Prompt" , go to the folder.
Type:
Upgrade <IPnumber> xxx.nkffw (enter)
