Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Technical Manual | TM-20210309-TP-01

iProtect Access / Security | General |

PDF Download

This manual represents the knowledge at the above-mentioned time. TKH security works non-stop to improve her products. For the most recent technical information please contact your consultant or dealer.

Table of content

HTML pages
This manual is valid from iProtect version 9.09

1.1 Default pages

Using <ip>iprotect™ Aurora:
https//<ip>
or
https//<ip>Webcontrols/main.html

Example:
https://192.168.9.10
or
https://192.168.9.10/Webcontrols/main.html

Using my iprotect™
Use the default main page to log in for my iProtect, the selection for my iProtect is automatically detected by
the credentials.
Special (visitor registration):
<https://<ip>Webcontrols/visitorregistration.html>

NOTE: Not recommended for new users. Will be deleted in the future.

Opening Keymap only:
<https://<ip>/Webcontrols/alarmmap.html>

NOTE: Opens the default alarmmap of this user.

Opening specific Keymap:
<https://<ip>/Webcontrols/alarmmap.html?<Floorplan> number>

NOTE: Opens the alarmmap with the specified Floorplan number.

Example:
https://192.168.9.10/Webcontrols/alarmmap.html?6
Login mobile phone:
<https://<ip>/Webcontrols/mainmobile.html>

1.2 Multisite alarm handling

Multiviewer:
<https://<ip>/Webcontrols/multisiteviewer.html>

NOTE: This opens default the main page and full navigation is possible.

Examples:
https://192.168.9.10/Webcontrols/multisiteviewer.html?person.html
https://192.168.9.10/Webcontrols/multisiteviewer.html?accesskey.html
https://192.168.9.10/Webcontrols/multisiteviewer.html?browsepresenceoverview.html
Multialarmmap:
<https://<ip>/Webcontrols/multisitealarmmap.html>

1.3 Presence browser

ATTENTION: When no area- or customgroup code is defined an error will be shown.

To show the ‘dialogue definition elements’ in the presence overview, enable ‘Show in selection’ for each
element.

1.3.1 Full screen mode

Opens a new full screen with the presence-monitor for one selected area.
<https://<ip>/Webcontrols/openpresencemonitor.html?areacode=<areacode>>
Example:
https://192.168.9.10/Webcontrols/openpresencemonitor.html?areacode=9

Opens a new full screen with the presence-monitor for multiple areas which are selected by a customgroup:
<https://<ip>/Webcontrols/openpresencemonitor.html?customgroupcode=<customgroupcode>>

Example:
https://192.168.9.10/Webcontrols/openpresencemonitor.html?customgroupcode=12

1.3.2 Form mode

Opens the dialog with the presence-monitor for one selected area.
<https://<ip>/Webcontrols/browsepresencemonitor.html?areacode=<areacode>>

Example:
https://192.168.9.10:8443/Webcontrols/browsepresencemonitor.html?areacode=9

Opens the dialog with the presence-monitor for multiple areas which are selected by a customgroup:
<https://<ip>/Webcontrols/browsepresencemonitor.html?customgroupcode=<customgroupcode>>
For this option it is mandatory to create an Custom group with <table name> selection “AREA”

Example:
https://192.168.9.10/Webcontrols/browsepresencemonitor.html?customgroupcode=12

1.3.3 Extra argument showchangetime

It’s possible to add an extra argument ‘&showchangetime’ to the URL. When this argument is added to the
URL, the Entry time will change to: ‘change time’
This argument can be used for Full screen- and Form mode presence browsers.

Example:
https://192.168.9.10/Webcontrols/browsepresencemonitor.html?customgroupcode=12&showchangetime

  • No labels