Siqura EX-TC620-PID F
Description
The EX-TC620-PID F is a thermal IP camera built into a fixed housing designed for use in hazardous areas in onshore, offshore, marine and heavy industrial environments (Atex and IECEx Zone 1). The camera housing is constructed from electro-polished 316L stainless steel for maximum corrosion protection and is fitted as standard with sunshield and a thermostatically controlled heater element.
Features
Explosion-protected, Atex and IECEx Zone 1, for use in onshore, offshore, marine, and heavy industrial applications
Integrated Thermal IP camera
Based on analytics certified by i-LIDS® for primary sensor in sterile zone
Wall or pole mount options
Electro-polished 316L stainless steel construction
Integral multiprotocol telemetry receiver
ONVIF Profile S conformant
IP66/IP67 Ingress rating
Intrusion detection
The embedded ObjectR-Advanced Perimeter Intrusion Detection (PID) is based on analytics certified by i–LIDS® and approved to be used as primary sensor in a sterile zone. Through the web interface, configuration of the ObjectR-Advanced PID analytics is straightforward with either two detection lines or two detection zones. To get the most out of the PID analytics Siqura offers the VCA Configuration Server. By using a thermal sensor the influence of external factors is limited to a minimum.
Thermal imaging
The thermal LWIR sensor and onboard analytics for accurate detection of unwanted intrusions make detection possible in all weather, no-light and difficult lighting conditions. Distractions, such as headlights of a car or search lights, can cause false alerts when CCTV cameras are used for detection analytics. Thermal detection with ObjectR-Advanced PID requires less experience and knowledge of detection analytics in difficult sceneries.
VCA Configuration Server (VCS)
ObjectR-Advanced PID detection analytics runs physically in the edge devices. The detection engine is more powerful when configured by the Siqura VCA Configuration Server. The configuration server adds detection templates, such as eight zones or lines. The VCS is capable of storing up to 64 channels of video and object data. Forensic searches can be performed by using the stored object data gaining search speeds up to 10,000 times faster than real-time. This feature can also be used optimise the configuration for a camera by using stored footage of the intended location.
Power source choices
The EX-TC620-PID F can be selected with 24 Vac, 115 Vac, and 230 Vac power option.
Models
EX-TC620-PID 7.5-F F 24 Ex d 316L IP Ti fixed housing with PID, 7.5 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 7.5-S F 24 Ex d 316L IP Ti fixed housing with PID, 7.5 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 9.0-F F 24 Ex d 316L IP Ti fixed housing with PID, 9 mm lens, 25 Hz , 336x256, 24 Vac
EX-TC620-PID 9.0-S F 24 Ex d 316L IP Ti fixed housing with PID, 9 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 13-F F 24 Ex d 316L IP Ti fixed housing with PID, 13 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 13-S F 24 Ex d 316L IP Ti fixed housing with PID, 13 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 19-F F 24 Ex d 316L IP Ti fixed housing with PID, 19 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 19-S F 24 Ex d 316L IP Ti fixed housing with PID, 19 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 25-F F 24 Ex d 316L IP Ti fixed housing with PID, 25 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 25-S F 24 Ex d 316L IP Ti fixed housing with PID, 25 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 35-F F 24 Ex d 316L IP Ti fixed housing with PID, 35 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 35-S F 24 Ex d 316L IP Ti fixed housing with PID, 35 mm lens, 9 Hz, 336x256, 24 Vac
EX-TC620-PID 50-F F 24 Ex d 316L IP Ti fixed housing with PID, 50 mm lens, 25 Hz, 336x256, 24 Vac
EX-TC620-PID 50-S F 24 Ex d 316L IP Ti fixed housing with PID, 50 mm lens, 9 Hz, 336x256, 24 Vac
Options
EX power option F 115 Power option for EX fixed camera housings, 115 Vac
EX power option F 230 Power option for EX fixed camera housings, 230 Vac
EX wall mounting bracket F 316L wall mounting bracket for EX fixed camera housings
EX pole mounting adapter F 316L pole mounting adapter for EX wall mounting bracket F
Ex 3 m conduit 25 mm M25 IP Ex d M25 barrier brass glands, 3 metre, 25 mm flexible conduit tail, power, IP
Ex +1 m conduit 25 mm M25 IP Additional Ex conduit 25 mm M25 IP, per metre
Ex 3 m conduit 20 mm M20 fiber Ex d M20 barrier brass glands, 3 metre, 20 mm flexible conduit tail, power, fiber
Ex +1m conduit 20 mm M20 fiber Additional Ex conduit 20 mm M20 fiber, per metre
Ex 3 m conduit 25 mm M25 fiber Ex d M25 barrier brass glands, 3 metre, 25 mm flexible conduit tail, power, fiber
Ex +1m conduit 25 mm M25 fiber Additional Ex conduit 25 mm M25 fiber, per metre
EX-WP10 Ex e 10-Liter manually pressurisable 304 washer tank, 316L cabinet, Ex e solenoid
EX-WP10 Ex d 10-Liter manually pressurisable 304 washer tank, 316L cabinet, Ex d solenoid
Ordering information |
|
---|---|
EX-TC620 7.5-S F 24 3C | Ex 316L fixed IP Ti 7.5mm 9 Hz 336 24Vac 3m conduit 20 mm M20 |
EX-TC620 7.5-S F 24 2SM 3C | Ex 316L fixed IP Ti 7.5mm 9Hz 336 24Vac 2SM 3m conduit 20 mm M20 |
EX-TC620 7.5-S F 24 3C | Lens type in mm: 7.5, 9.0, 13, 19, 25, 35, or 50 |
EX-TC620 7.5-S F 24 3C | ‘-S’ for Slow (8.3 fps) or ‘-F’ for Fast (30 fps) |
EX-TC620 7.5-S F 24 3C | Replace 24 with 115 or 230 respectively for 115 or 230 Vac power |
EX-TC620 7.5-S F 24 3C | Replace 3C with 5C or 10C respectively for 5 or 10 metre conduit |
|
|
Camera housing |
|
Certification | ATEX, IECEx |
| II 2 G Ex d op pr IIC T6 |
| II 2 D Ex tb IIIC T85°C Db IP66/67 |
Ingress protection rating | IP66/ IP67 |
Body material | Electro-polished 316L stainless steel |
Conduit | 20 mm low fire hazard, liquid tight conduit Galvanised steel core zero halogen |
Glands | 2x M20 Brass flameproof barrier glands, pre-assembled |
Length | 3 m; Optional 5 or 10 m |
Sunshield | Standard |
Internal demister/heater | Standard |
Wiper | N/A |
Operating temperature | -20 °C to +60 °C |
“Dry heat” test | +75 °C, 2 days |
Weight | 12 kg |
|
|
Electrical |
|
Supply voltage | 24 V 50/60 Hz; Optional 115 V 50/60 Hz; 230 V 50/60 Hz |
Power consumption | 25 W maximum |
Electrical connections | 3 wire power cable from the conduit, 0.75 mm2 |
|
|
Thermal imager |
|
Imager | Uncooled micro-bolometer |
Pixel pitch | 17 µm |
Resolution | 336 x 256 pixels |
Focal length | 7.5 mm | 9 mm | 13 mm | 19 mm | 25 mm | 35 mm | 50 mm |
Field of view | 45°x35° | 35°x27° | 25°x19° | 17°x13° | 13°x10° | 9.3°x7.1° | 6.5°x5° |
f-number | f/1.4 | f/1.25 | f/1.25 | f/1.25 | f/1.1 | f/1.5 | f/1.2 |
Spectral bandwidth | 7.5 µm to 13.5 µm (LWIR) |
Frame rate | 8.3 fps (xx-S version) Optional: 30 fps (xx-F version) |
Sensitivity (NEdT) | < 50 mK @ f/1.0 |
Time to image | Instantaneous |
Digital zoom | No |
|
|
Analytics |
|
Freeform zones or detection lines | 2x in stand-alone (Web configured) up to 8x with the “VCA Configuration Server” |
Event type | Detection line: Touch, Cross (directional sensitive), Cross |
| Detection zone: Touch, Enter, Inside, Exit |
Event time | 0 to 10 s |
Event output | generic ONVIF, digital I/O, SPI |
Measuring range | -40 °C to 550°C |
Accuracy | +/- 20 °C (T< 100 °C) or +/- 20% (T> 100 °C) |
|
|
Video |
|
Number of video streams | 2x H.264/MJPEG |
Max resolution | 720 x 512 @ 25/30fps (upsampled) |
Number of output streams | Up to 20 (RTSP) |
Compression algorithm(s) | H.264 (H.264/MPEG-4 AVC), MJPEG |
Encoder bit rate control | Constant bit rate (CBR), variable bit rate (VBR) |
Output bit rate (per H.264 stream) | Up to 6 Mbit/s |
Total output data rate | Up to 32 Mbit/s |
Video overlay | 3x Text, 1x bitmap (BMP, GIF); PID Object data (blue blob), event data (red box); |
|
|
Network |
|
Interface(s) | 10/100 Mb Ethernet (4-wires 0.5 mm2 from conduit) |
Protocols | IPv4, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, , UPnP, IGMP, SNMP, QoS, ONVIF |
Password levels | User and Administrator |
Supported browsers | Internet Explorer (6.0+), Chrome, Firefox, Safari |
User accounts | 20 |
|
|
Accessories |
|
EX pole mounting adapter F | 316L pole mounting adapter for EX wall mounting bracket F |
EX wall mounting bracket F | 316L wall mounting bracket for EX fixed camera housings |
EX Pole Top Mounting F | 316L Pole TOP Mounting bracket for EX fixed camera housing |
Ex e termination box IP | 316L Ex e termination box for IP camera |
(Ex e termination box fiber) | (316L Ex e termination box for fiber cameras) |
|
|
Maintenance & replacement kits |
|
EX-MK F | Maintenance kit EX Fixed camera: O-Ring, screws, desiccant bags |