*holdPosition
- Tom Polman
Configuration Article | CA-20220907-TP-15 VDG Sense | API | Functions | Camera Control  |  |
This function is deprecated. To stop dome movement, the function setRelativePosition should be used with the value zero (0) for all PTZ-parameters.
This command can be issued to selectively stop dome control. All values are optional, when not supplied, or the value is zero (0), the current value is maintained
Request
command=holdPosition&serverid=[UID]&cameraid=[UID]&pan=[0|1]&tilt=[0|1]&zoom=[0|1]&focus=[0|1]&iris=[0|1] |
parameter | type | remarks | Â |
|---|---|---|---|
serveid | [UID] | unique server id. | Â |
cameraid | [UID] | unique camera id | Â |
pan | [0 | 1] | 0 means do nothing, 1 means stop pan changing |
tilt | [0 | 1] | 0 means do nothing, 1 means stop tilt changing |
zoom | [0 | 1] | 0 means do nothing, 1 means stop zoom changing |
focus | [0 | 1] | 0 means do nothing, 1 means stop focus changing |
iris | [0 | 1] | 0 means do nothing, 1 means stop iris changing |
Response
error code | description | remarks |
|---|---|---|
0 | Ok | Ok, no error |
-2 | No device | No device found for the supplied cameraid/deviceid |
-18 | General error | An undefined error occured |
-19 | No dome | Ok, no erro |
-21 | Device no active | The device is not active in the current profile and cannot produce any results |
Â