IPROTECT Access - Network sockets
- MB
- André Alberts
- Arnout van Wanrooij
Technical Support Guide | MB-20240516 iProtect Access / Security | Network sockets  |
|
This manual represents the knowledge at the above-mentioned time. TKH security works non-stop to improve her products. For the most recent technical information please contact your consultant or dealer.
IPROTECT Access: starting from version 10.3
Software | Protocol | Port | TYPE | Duplex | Description | Comment |
iProtect = > 10.3 | 443 | TLS | Full | Maintenance Page | iProtect Maintenance is a web-based graphical interface | |
443 | TLS | Full | Cockpit | Cockpit is a web-based graphical interface | ||
443 | TLS | Full | iProtect User interface | iProtect User interface is a web-based graphical interface |
Hardware | ||||||
Network controller (Pluto and ApolloN = > 10.3 | 20201 | TCP77 | Half | Line manager → Network device | TCP77 is used for IPU, Polyx and Apollo connection and to upgrade Pluto and ApolloN controllers to use Websocket connection. | |
20100 | TCP77 | Half | Network device → Line manager | TCP77 is used for IPU, Polyx and Apollo connection and to upgrade Pluto and ApolloN controllers to use Websocket connection. | ||
443 | TLS | Half/Full | Line manager → Network device | 443 is Apache (Maintenance page controller). A proxy forward mechanism has been implemented. Now TLS can use port 20200 directly or through 443 (and this will "forward" it to 20200). | ||
443 | TLS | Half | Network device → Line manager | 443 is Apache (Maintenance page controller). A proxy forward mechanism has been implemented. Now TLS can use port 20099 directly or through 443 (and this will "forward" it to 20099). | ||
20200 | TLS | Half/Full | Line manager → Network device | Settings / Events | ||
20099 | TLS | Half | Network device → Line manager | Events only | ||
Uses server connection |
| Full | Network device ←|→ Line manager | The line manager sends its messages via TLS to port 20200. The transactions go back through the same connection. | ||
Network controller (Pluto and ApolloN = > 10.3 | UDP | 123 | NTP | Half/Full | Network device → Line manager | Necessary so network controller time is synchronized with iProtect server time |
ApolloN |
|
| 161, 162 |
| SNMP v3 | Firewall configured for these two ports when using rootFS = > 6.12.02.x
|
By default, port 443 is closed on the controller. To open it, you need to modify the port settings on the line detail page from “secure” to “Secure (+ Port 443 proxy forward)”.
IPROTECT Acccess (Mobile access) | ||||||
Mobile access | 443 | TLS |
| Mobile phone - Token Authority |
| |
443 | TLS |
| iProtect - Token Authority |
| ||