Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Configuration Article | CA-20201001-LG-03

iProtect Access / Security | Video | Aurora Setup LPR |

PDF Download

Open menu item “Installation” > “Hardware” > “Reader”.

  1. Select the reader that controls the boom at the entrance.

  2. Under “General”, select the camera configured above.

  3. Choose the ‘Camera Access Mode’ in the “Others” tab.

  4. Go to the input/output tab and configure a loop.

  • No labels