/

*Reader setup

*Reader setup

Owned by Tom Polman

Last updated: Sept 15, 2022

1 min read

Configuration Article | CA-20201001-LG-03

iProtect Access / Security | Video | Aurora Setup LPR |

Open menu item “Installation” > “Hardware” > “Reader”.

Select the reader that controls the boom at the entrance.
Under “General”, select the camera configured above.
Choose the ‘Camera Access Mode’ in the “Others” tab.
Go to the input/output tab and configure a loop.

Related content

*License plate configuration

*License plate configuration

More like this

*Potential malfunctions

*Potential malfunctions

Read with this

*Line configuration

*Line configuration

More like this

*License plate settings

*License plate settings

Read with this

*Cameras in iProtect™

*Cameras in iProtect™

More like this

*iProtect™ Aurora setup (LPR)

*iProtect™ Aurora setup (LPR)

Read with this