*Configuring network data in Commend intercom stations

Owned by Tom Polman
Last updated: Sept 19, 2022
2 min read

Configuration Article | CA-20211229-LG-01

Intercom |

The program IPStationConfig is required to change, add or view network data of an intercom station.

Using the link below, the program IPStationConfig may be downloaded. (If the link has been downloaded and unzipped, the folder CCT800 contains the tools to be installed.

https://clibrary-online.commend.com/download/c414-3f53

Once installed, the program IStationConfig can be started

As an Example, below is a print screen. At the very bottom there is the possibility to select the correct network card.

Once in the correct network, the "Query Stations" button can be clicked. As a result, the program displays all the stations in the network (search results based on MAC address), including their IP address, Subnet mask, Router-IP and Card-IP.

When a new intercom station needs to be provided with network data, "Query stations" can again be clicked. The result is that the new intercom station is shown. The required network data can then be entered in the appropriate fields. When everything is set correctly, click on "Write settings: all". The intercom station will then be provided with the correct network data.