NVH-1002 Quick start guide

This is a quick start guide for the NVH-1002 Network video display decoder. This guide walks you through the basic setup and is designed to give you a basic understanding of the device settings that is needed to install and configure the device.

This guide will cover the installation of the NVH-1002 into your DIVA Server network, the NVH Web-interface and its default settings. The NVH-1002 is fully preconfigured with an active license and DHCP settings.

NDD Setup

Follow these steps to connect the NVH to your network

  1. Connect the 12V DC power adapter to your power socket.

  2. Connect a monitor to the NVH through either the DVI, HDMI or VGA port

  3. Connect an ethernet cable comming from a DIVA server network

  4. Press the power switch located on the back to boot the system

System schematic

The NVH-1002 needs to be connected to the same network as the DIVA Server. In the above schematic, you can see an example setup of 2x NVH-1002 in a single DIVA Server network. To add the NVH, login into your DIVA server and click the ‘Monitor’ tab and click ‘Find’. The dialog should automatically discover decoders in your network.

Sign in

Enter the username and password in their corresponding fields and click ‘Sign In’to sign in.

Web interface

Username: admin
Password: admin

DIVA

Username: administrator
Password: !DVadmin

General Settings

Hostname:  Network hostname
Description: General description for references purposes
Software version: Current installed software version

DIVA Username: The username of the DIVA Server
DIVA Password: The password of the DIVA Server
Transcoding: Enable to transcode images over the network (disabled by default)

 

 

 

Network settings

Enable DHCP: The NVH is preconfigured with a specific IP address. Enable this option to automatically use the default network settings.

By default, the NVH uses the following parameters:

IP-address / Netmask: 192.168.0.100 / 255.255.255.0

Browser compatibility

The following internet browsers are recommended for the DIVA Web-interface

Internet explorer: 9+
Firefox: 3.5+
Chrome: 10+
Safari: 5+

 Specifications

Chipset Manufacturer

Intel

Communication

DIVA Server

Decoding

h.264, MPEG-4 and MJPEG

Display layout

Free adjustable by DIVA VMS
Maximum of 16 panels per layout

Graphics

DVI, HDMI and VGA

Video Resolution

640×480
800×600
1024×768
1280×1024
1600×1200
1920×1080 HD Ready

TCP/IP Interface

Fast Ethernet and Gigabit

Power

12DC (9W) via DC-jack or RJ45*

Housing

Aluminium

Operation temperature

-10° ~ 50°

Dimensions

190(W) x 60(H) x 240(D) mm

Green Compliance Certificate/Authority

Energy Stasr, RoHS

*The power adapter can be replaced with any 12V adapter which meets the same requirements