*Line configuration

Owned by Tom Polman
Last updated: Sept 15, 2022
1 min read

Configuration Article | CA-20201001-LG-15

iProtect Access / Security | Video | Configuration Aurora |

  1. In the iProtect™ Aurora menu, go to “Installation” > “Hardware” > “Line”.

  2. Right-click on the line menu and select “Add line”. The details pane will open.

  3. Give the line a practical name, such as “Camera server”

  4. Select the following specifications

  • Type : “Server”

  • Mode : “Keyprocessor”

  • Active : (mark field)

  • Active (with nodes): (mark field)

  • IP address : leave this field blank (local host)

  1. Click on “Save”.