/
*Line configuration
*Line configuration
In the iProtect™ Aurora menu, go to “Installation” > “Hardware” > “Line”.
Right-click on the line menu and select “Add line”. The details pane will open.
Give the line a practical name, such as “Camera server”
Select the following specifications
Type : “Server”
Mode : “Keyprocessor”
Active : (mark field)
Active (with nodes): (mark field)
IP address : leave this field blank (local host)
Click on “Save”.
, multiple selections available,
Related content
*Camera preset in iProtect™ & VDG Sense
*Camera preset in iProtect™ & VDG Sense
More like this
*iNVR Actions
*iNVR Actions
Read with this
*Cameras in iProtect™
*Cameras in iProtect™
More like this
*iProtect™ - Installation
*iProtect™ - Installation
Read with this
*System settings
*System settings
More like this
*Quickstart iProtect 10.0.x
*Quickstart iProtect 10.0.x
Read with this