Open

Configuration Article | CA-20201217-LG-01 Intercom |

Open

Inlog VirtuoSIS

Login naam:    admin

Password:       

Step 1

• Open VirtuoBro

• Search for a VirtuoSIS host

• Connect to the VirtuoSIS host

• Go through all the steps of the basic settings

• Connect now with ICX using CCT software 

Step 2

Open

• Open CCT software

• Connect to the ICX

• Receive the configuration (intercom server/ receive F5)

• Configure the cards (project/ intercom server/ cards)

• Also configure "start call number"

• Now load the supplied licence and link it to the Card  (intercom server/ license  administration)

• Sync all licenses

Step 3

• Set IP settings for all cards

• Set IP Settings IP Terminals

Send configuration (intercom server/ send F4)

Step 4

• Open IpStationConfig software

• Configure all IP terminals (IPaddress, name, and card IP)

Step 5

• Customise subscriber settings.  

• Activate outputs IpTerminals  

Send configuration (intercom server/ send F4)

• Create control desk – right mouse button/ add

• Create call-request – right mouse button/ add  (create all terminals)

• Under terminals concerning "control desk” - right mouse button/ add

• Activate camera terminal – station properties/ camera

Send configuration (intercom server/ send F4)

• Setting up Door opener - right mouse button/ add

• Linking exit to opener  - right mouse button/ add

Step 6

• Backing up .m. VirtuoBro