NTCIP ( SIQURA )

  • Introduction

For the USA market, Siqura supports the NTCIP standard (see http://www.ntcip.org) in selected codec and camera products. NTCIP is a standard primarily used in the US traffic market. One of the functionalities described is camera control using SNMP, using MIBs defined in the NTCIP-standard. This memo describes which parts of the NTCIP standard are implemented in these products.

Product

Remarks

C-60 E-MC

From firmware version 3.12

C620 E

 

C620 E-PID

 

C-60 E-MC

From firmware version 3.12

S-64 E

From firmware version 3.12

S-64 E/32G

From firmware version 3.12

S-60 E v2

 

S-64 E v2

 

S-68 E

From firmware version 3.12

S620 E

 

BC620WDR

 

BC620WDR-PID

 

BC840-MC

 

BC840-PID

 

BC840v2

 

HSD622

From firmware version 3.12

HSD626

From firmware version 3.12

HSD820H3

 

TC620-PID

 

TrafficPTZ Ultimo

 

XCU (Compact and Fusion)

 

 

NTCIP relies on SNMP to communicate with the camera devices. Sections of the following SNMP MIBs published by the NTCIP organization ( see https://www.ntcip.org/document-numbers-and-status/ and https://www.ntcip.org/how-to-get-mibs/ ) are implemented.

MIB

Description

CCTV-MIB1-STRIPPED

This is the CCTV-MIB as published by the NTCIP, stripped from all not-camera-related functionality.

NTCIP1201-2008-STRIPPED

NTCIP1201-2008 MIB as published by the NTCIP, stripped from all not-camera-related functionality

NTCIP8004-2008

No extra functionality, just included by the MIB’s above

NTCIP8004-A-2004

No extra functionality, just included by the MIB’s above

RFC1213-MIB

No extra functionality, just included by the MIB’s above

 

For the stripped MIB’s, the following parameters are implemented:

  • CCTV-MIB1-STRIPPED

  1.  

Parameter

Implementation

rangeMinimumPanStepAngle

Yes

rangeMinimumTiltStepAngle

Yes

rangeMinimumPanStepAngle

Yes

rangeMinimumTiltStepAngle

Yes

presetGotoPosition

Yes

presetStorePosition

Yes

positionPan

Yes

positionTilt

Yes

positionZoomLens

Yes

positionFocusLens

Yes

positionIrisLens

Yes

systemCameraEquipped

Yes (always returns 0, no heater/washer/wiper/etc…)

systemLensFeatureControl

Yes

systemLensFeatureStatus

Yes

systemLensEquipped

Yes

 

  • NTCIP1201-2008-STRIPPED

Parameter

Implementation

globalSetIDParameter

Yes

globalMaxModules

Yes

controllerBaseStandards

Yes

hdlcGroupAddressEntry

Yes

moduleTableEntry

Yes

 

Â