*License plate configuration

Owned by Tom Polman
Last updated: Sept 15, 2022
2 min read

Configuration Article | CA-20201001-LG-02

iProtect Access / Security | Video | Aurora Setup LPR |

To iProtect™ Aurora, a license plate is a type of access card. As soon as the license plate enters the camera’s field of vision, the vehicle/driver is granted access depending on access rights. If you want to assign access rights to a certain license plate, you must add the license plate as a card to the “card” menu element.

Open menu item “Access” > “Card”.

  1. Configure a new card (right-click in the browse window to the left).

  2. Under “Card number entry”, select the “License plate” previously configured as a license plate entry.

  3. Into “Card number”, enter the country code followed by a comma, then the license plate number without any hyphens (e.g. “NL,11FGT9”).

  4. Now enter the remaining details as you would for a regular card.

  5. Mark the “Link card with card” field. This will prevent problems with APB or clocking functions if, for example, someone enters an area using license plate recognition and leaves it using a card.