*Storage Setup
Configuration Article | CA-20210707-MH-04 VDG Sense | Setup | Profiles | Storage |
Activate Storage
Activate or deactivate the storage of device of this profile. Data from the device will be recorded when set. This setting allows to select which device will be recorded in which profile.
Continuous Record
Determines if recording is continuous (set) or event driven. Events can be e.q. motion, alarm input, face found, license plate found.
Record frames with motion
If set frames with motion will be recorded.
Pre Event Storage
Recording on pre events in seconds. Maximum of 300 seconds with 30 seconds intervals.
Post Event Storage
Recording on post events in seconds. Maximum of 300 seconds with 1 second intervals.
Storage Interval
Record single image every x seconds in the absence of motion. For instance a value of 60 seconds will record an image every minute. By default it is 3600 seconds which is once an hour.