*Streaming - Multi Streaming
- Tom Polman
- Matthijs Streefland
Configuration Article | CA-20210521-MH-01 VDG Sense | Setup | Devices | Multi Streaming  | 
|
Multi Streaming
Multi streaming is best used in a system in which multiple high resolutions are presented at the same time.
For example, in a situation where 16 Full HD with H.264 encoding are displayed, will have a significant impact on the CPU, regardless of actual panel size in Sense.
To help reduce the CPU load, the display resolution of the devices can be lowered while still recording in the original Full HD resolution. Additionally, it's possible to display the native resolution if the video is displayed in a larger video panel.
Note: For selected TKH Security Solution or Hikvision driver cameras, triple streaming is supported. This means VDG Sense can use a third stream for either recording, displaying or VCA.
Setting up stream 2 or 3
Stream Profile
For some cameras it is required that the stream profile is entered here. See this article for more information: https://tkhsecurity.atlassian.net/wiki/spaces/KB/pages/9168946058/Reducing+network+and+client+load
Max panel width
The maximum video panel width in pixels in which stream 2 will be displayed. If the video panel exceeds this number, stream 1 will be displayed. Normally this value is sliglhy higher than the actual setting of the second stream videostream width. For instance if the second stream is 720/576, the max panel width could be 960. To check the dual streaming configuration enable famerate and resolution in the OSD style (Read more). This will show the resolution and framerate in the videopanel when in operator mode.