*How to add a SV VCN reader to iProtect™
This how-to assumes that there is already an existing situation, if this is not the case, one must first implement the basic implementation of SV VCN.
Add the offline reader in iProtect™.
Go to Installation > Hardware > Line in iProtect™.
double-click on the SV VCN line, the node will now be visible.
Right-click on the node and select menu item “Add reader”.
If the reader is created, add the reader to the desired reader group (double-click on the reader and see the “Reader group list” below the reader).
Program the reader with the SV software SmartIntego VCN.
Click on the SV node and click on the button “Export” to download the configuration file.
Connect the SmartCD (USB programming device) to your laptop.
Open the existing project inside the Smartintego VCN software.
Click on the import button inside the smartIntego software to import the configuration file.
Now you see the locks inside the Smartintego software and there will be a programming task available at the new lock.
Put the SmartCD (programming device) to the lock and push on the “Execute All Tasks” button.
When all the tasks are complete, you must export the configuration file from the Smartintego software.
Synchronize the lock status inside iProtect™.
Go to the SV node inside iProtect™ to upload the SV smartintegro export file.
Click on the SV node and press on the “Upload” button and select the export file, when the file is selected press on the “Import” button.
You can check the Reader synchronization status, you will see this information in the reader details when u select the reader, the sync status must be in the status “Reader is Synchronized”.
The reader is ready to use if he has the status “reader is synchronized”